Release notes

TailFit 1.1.0 release notes

Better handling of held notes and background sounds, new input filters, accent colours and a reworked waveform display.

Product
TailFit
Applies to
Version 1.1.0 · Windows 10/11 x64

Platforms

  • TailFit 1.1.0 is available as a 64-bit VST3 plugin for Windows 10/11 x64.

Fixed: held notes and background sounds

  • A long held note (for example a Reese bass) is now fitted to the Tail Length after its attack, the same way on every pass of a loop. Before, a held note could pass unprocessed after the next hit or loop point.
  • Background sounds (“beds”: room tone, noise, a pad under drums) are now kept for as long as they play, including through drum pauses longer than 4 seconds. Before, a bed could be cut to silence 4 seconds after the last hit.
  • A level counts as a bed when it sits at least 12 dB below the hits around it. When a bed ends, it is released smoothly, never in one step.
  • Steady noise on its own (with no real hits) is faded out over the Tail Length once TailFit reacts to one of the noise’s own peaks: smoothly, never cut.

Input filters

  • High pass (20 Hz to 1 kHz) and low pass (1 to 20 kHz), each with its own on/off switch, at 12 dB per octave. They filter the audio before TailFit detects hits and shapes the tails.
  • Switching and frequency changes are smooth, so the filters can be automated without clicks. The filters add no latency.
  • Bypass returns the original, unfiltered sound with the same latency.
  • Presets and A/B store the filter settings.

Accent colour

  • Choose the accent colour with the round button at the top right: yellow (default), pink, green, cyan or purple. It is saved with the project.

Waveform display

  • A stable, smoothly scrolling waveform with a continuous outline at every size.
  • After playback stops, the history scrolls out and the display shows “Waiting for audio”.
  • Incomplete or lost display data is marked instead of being hidden. The audio is never affected by the display.

Panel

  • The filter controls sit in the bottom panel. The short descriptions of the main controls are shown when you hover over a control.
  • The status line at the bottom shows the VST trademark notice.

Compatibility

  • Projects, automation and user presets from TailFit 1.0 load unchanged (filters off, yellow accent).
  • TailFit now reports a 200 ms tail to the host, so hosts that stop processing on silence do not cut off the high-pass filter’s ring-down. TailFit itself never makes a sound longer.
  • On Windows, the Microsoft Visual C++ runtime is built in; no separate redistributable is needed.

Testing

  • Automated tests of the audio processing, the filters, project state, presets, the user interface and the display.
  • pluginval, an independent plugin validator, at its strictest level.
  • Hands-on testing in Bitwig Studio 6 on Windows.

Tested on Windows 10 and Windows 11 (64-bit). Host testing: Bitwig Studio 6. Not tested yet: other DAWs.